How to choose a suitable 808nm diode laser power supply?
We are professional manufacturer of 808nm diode laser kits, 808nm diode laser handpiece, 808nm diode laser power supply, 808nm diode laser controller, all kinds of 808nm diode laser spare parts is available
Recnetly, There are so many clients and enginner give us the feedback about diode laser power supply, they really do not know how to choose a suitable diode laser power supply for the broken 808nm diode laser machine, today, we would like to share with all the clients and engineers how to choose a suitable 808nm diode laser power supply to repair the problem 808nm diode laser machine on the market,hope it will helm them a lot!
Firstly, the engineers need to confirm how many laser bars inside of the problem diode laser handpiece, usually most of china 808nm diode laser machine, the numbers of diode laser bars inside of the laser handpiece from 5-16,The power of each laser bars between 50W and 100W
Secondly, enginneer and clients need to confirm how much total power of clients's 808nm diode laser handle,For now most of 808nm diode laser machine apply 300W-1600W 808nm diode laser stack,so most of 808nm diode laser machine the handpiece stack power from 300W-1600W
After confirm the numbers of laser bars inside of the diode laser handpiece, and confirm the power of each laser bars,than surely they will confirm how much total power of the 808nm diode laser stack,After confirm the total power of diode laser stack, then it is very easy to choose one suitable 808nm diode laser power supply
This is the date sheet of 808nm diode laser power supply,depends on the laser bars power and numbers of laser bars,easy to choose one suitable 808nm diode laser power supply
| Pin # |
Pin Name |
Function description |
| P1 |
—Enable |
Enable, active low |
| P2, P3 |
—NC |
|
| P4 |
—GND/VREF(-) |
Current reference ground |
| P5, P6 |
—NC |
|
| P7 |
—VREF(+) |
Current reference (0-4.5V) |
| P8 |
—Pulse |
Working pulse, high level effective |
| P9, P11, P15 |
—12V(-) |
Auxiliary power output negative |
| 910, P12 |
—NC, |
|
| 913, P14 |
—12V(+) |
Auxiliary power source output positive
(DC12V @ 200mA) |
This power supply is for 50A diode laser(1-12bar,macro channel and micro channel),
24V is the max voltage,It does not mean that it always outputs 24V,the voltage will change automatically according to the number of bar
